08081 680 753 

MON - FRI 9am-5pm

Splashback measuring guide

Tools required

  • Tape Measure
  • Pencil / Paper

Measure the area where you will be fitting your glass splashback.

We recommend that you take 3 different measurements for the Width and Height.

Use the shortest measurement you have taken.

Once you have your measurement, we recommend taking 5mm from the overall width and 3mm from the overall height.

For instance, if the tight size is 600mm x 750mm you would order the glass at 595mm x 747mm.

Please remember to double check your sizes before placing the order. Once glass has been cut and toughened it’s unable to be cut down.