Are you an installer?
Register for a Trade Account
Resources

How to measure your Splashback

By Printed Splashback

When purchasing a glass splashback, it’s essential to take the correct measurements to ensure a perfect fit. All measurements for our products are in millimetres.

We advise that you double check all measurements thoroughly before placing an order with us and that you read our Measuring Guide carefully.

Measuring Guide

Measure the area where you will be fitting your glass Splashback. We recommend that you take 3 different measurements for the Width and Height.

Use the shortest measurement you have taken.

Expansion of glass must be taken into consideration when measuring for a glass Splashback, therefore please take note of the necessary deductions to make.

Once you have your measurement, we recommend taking 5mm from the overall width and 3mm from the overall height.

For instance, if the tight size is 600mm wide x 750mm high, you would order the glass at 595mm x 747mm.

Ordering the correct dimensions is very important since, once glass has been cut and toughened, the sizes can't be changed.

More Resources

Splashback Fitting Guide

Please read our Fitting Guide carefully before installing your splashback. For splashbacks with fixing holes, we provide a fixing kit […]
Read More

How to measure your Splashback

When purchasing a glass splashback, it’s essential to take the correct measurements to ensure a perfect fit. All measurements for […]
Read More

How to choose your perfect Splashback

Firstly, you should make sure that your splashback is produced in toughened glass (tempered glass) which is significantly stronger than […]
Read More
Registered in England  |   Copyright © 2024 PrintedSplashback.com
Site by Bozboz